Micro ATX 300W
 
  • 300 Watts output
  • High quality 80mm fan design.
  • Dual S-ATA power included
  • Passive Power Factor Correction (PFC)
  • Extra long cables to support server (full) tower cases.
  • Over Voltage Protection,
  • Over Power Protection,
  • Over Heat Protection Short
  • Circuit Protection
  • Built in Quad protection





  • Dimension
     
    6X Peripheral Power Connector
    1X 4-pin ATX12V Power Connector
    2X Floppy Drive Power Connector
    2x S-ATA
     Dimension
    Unit Size 150mmx100mmx86mm
    Net Weight 2.0KGS
    Compatible

    Maximum Power
    300W      
    Switches 110V/230V
    Special connectors
    1*20+4 P, 1*SATA
    Transient Responser
    No define in the spec
    P.G. Signaler

    TTL compatible. The low level is 0 to 0.8V, high level is 4.75 to 5.25V, "the Power Good" signal can drive up to 6 standart TTL loads.

    Over Voltage Protection recycle AC to reset
    +5V,+12V1,+12V2,+3.3V DC output are protected against the over voltage condition. Maximum value can`t be over 6.5V at 5V terminal and 15.5V at 12V1&+12V2,4.3V at 3.3V
     
     
    INPUT
    Input Voltage
    180VAC~264VAC
    Input Frequency
    50-60Hz
    Input Surge Current
     
    Input Current
    6A
    Hold-up Time
    Hold-up>16mS
    Efficiency
    power supply is a minimum of 68% efficient
    EMI/RFI
    (ECstandard CISPR22 class B),7cc

     

     

    OUTPUT
      +5v +12V1 +12V2 -12V +5Vs +3.3V    
    Max load
    0.3A 10.0A 15.0A 0.5V 2.0A 17.0A    
    Min. Load
    25.0A 1A 1.0A 0.0V 0.0A 0.3A    
    Regulation +5% +5% +5% +10% +5% +5%    
    Ripple m(p-p) 50mV 150mV 50mV 120mV 50mV 50mV    


     

     

    ENVIRONMENTAL
    Operating Tem.
    0~50C
    Operating Alt.
     
    Non-Operating Vibration
     
    MTBF
    100,000 hours
    Safety Approval
    UL CSA CE FCC TUV
     
    Noise levels
    oV                              
    V                                
    RPM                              
    db