450W JN1207-450-AP with 120mm  
       
  • 450 Watts Output
  • Support both 20pin and ATX12V 2.0 24pin motherboards.
  • 20+4 main connector -- 20-pin and 24-pin dual use main connector
  • 120mm High quality ball bearing fan design
  • S-ATA power connector included
  • Active Power Factor Correction (PFC)
  • Extra long cables to support server (full) tower cases.
  • Automatic/Manual fan speed control (A.F.C) or smart fan
  • I/O Switch for manual shut-down.
  • Over Voltage Protection,
  • Over Power Protection,
  • Circuit Protection
  • Galvanized casing (Mirror finish)
  • Available in Black, Blue, Silver and Gold
    		•

    Dimension
     
    1X 20+4 main connector Standard ATX
    1X PCI Express Connector
    6X Peripheral Power Connector
    1X 4-pin ATX12V Power Connector
    2X Floppy Drive Power Connector
    1x S-ATA
      Dimension
    Unit Size 150mmx140mmx86mm
    Net Weight 1.85KGS
    Compatible

    Maximum Power
    		 450W      
    Switches 230V switchable
    Special connectors
    		 1* 20+4 P, 1* PCI-E 6PIN, 2* SATA
    Transient Responser
    		 transient load slew rate is = 1.0 A/µs.
    P.G. Signaler
    		 100-500mS
    Over Voltage Protection recycle AC to reset
    		 1 second
     
     
    INPUT
    Input Voltage
    		 180VAC~264VAC
    Input Frequency
    		 47-63Hz
    Input Surge Current
    		 100 amps maximum/230Vrm
    Input Current
    		 6A
    Hold-up Time
    		 Hold-up>16mS
    Efficiency
    		 power supply is a minimum of 72% efficient
    EMI/RFI
    		 EN55022 CLASS B

     

     
    OUTPUT
      +3.3V* +5v +12V1 +12V2 +5Vsb -12V    
    Max load
    		 30A 28A 14A 15A 2.5A 1A    
    Min. Load
    		 0.5A-30A 0.5A 0.5A 1A 1A 0A    
    Load Reg.
    		 +5A ~ -6A 0.5A -28A 1A -14A 1A-15A 0A-2.5A 0A ~ 1A    
    Ripple m(p-p) 75mV 75mV 150mV 150mV 75V 150mV    

     

     
    ENVIRONMENTAL
    Operating Tem.
    		 0~30C
    Operating Alt.
    		 40C
    Non-Operating Vibration
    		 0.02 g²/Hz from 20 Hz to 500 Hz.
    MTBF
    		 100,000 hours
    Safety Approval
    		 CE
     
    Noise levels
    oV 25 30 35 40 45 50 55 60 65 70 75 80 85 90  
    V  
    RPM  
    db