400W JNP-400P with dual 80mm fan  
       
  • 400 Watts output
  • Dual high quality ball bearing fans design
  • Support both 20pin and ATX12V 2.0 24pin motherboards
  • 20+4 main connector -- 20-pin and 24-pin dual use main connector
  • Dual S-ATA power connector included
  • Passive Power Factor Correction (PFC)
  • Extra long cables to support server (full) tower cases
  • Fan Speed Monitor connector (3-pin)
  • Easy Connect Peripheral power connectors -- now removing the power
         connector from HD or CD ROM is easy, simply sqeeze and pull
  • Automatic fan speed control (A.F.C) or smart fan
  • I/O Switch for manual shut-down
  • Over Voltage Protection
  • Over Power Protection
  • Over Heat Protection Short
  • Circuit Protection
  • Built in Quad protection
    		•
    Dimension
     
    1X 20+4 main connector Standard ATX
    1x PCI Express Connector
    6X Peripheral Power Connector
    1X 4-pin ATX12V Power Connector
    2X Floppy Drive Power Connector
    1X 3-pin Fan Speed Monitor
      Dimension
    Unit Size 150mmx140mmx86mm
    Net Weight 2.25KGS
    Compatible

    Maximum Power
    		 400W      
      I/O switch, 115/230 switch
    Special connectors
    		 1 x 20+4 pin M/B; 1 x ATX 12V 4 pin, 6 x peripheral connectors, 2 x floppy drive power connector, 2 SATA connector, 1 x PCI connector, 1 x 3 pin fan monitor connector
    Transient Responser
    		 Not define in the spec
    P.G. Signaler
    		 TTL compatible. Signal goes high 100-500ms
    Over Voltage Protection recycle AC to reset
    		 The +5V/+12V1/+12V2/+3.3V DC output are protected against the over voltage condition. Maximum value can’t be over 7V at 5V terminal, 15.6V at 12V1 & 12V2, 4.5V at 3.3V.
     
     
    INPUT
    Input Voltage
    		 115/230Vac (Switch select)
    Input Frequency
    		 47-63Hz
    Input Surge Current
    		 Less then the ratings of it’s critical components (Including bulk rectifiers. Fuses and surge limiting device).
    Input Current
    		 8.0A at 115Vac; 4.0A at 230Vac
    Hold-up Time
    		 >16ms at full load at 115 Vac
    Efficiency
    		 Typical 70% at full load
    EMI/RFI
    		 FCC Part 15 Class B & CISPR 22 Class B

     

     
    OUTPUT
      +3.3V* +5v +12V1 +12V2 +5Vsb -5V -12v  
    Max load
    		 28A 35A 15A 17A 2A 0.3A 0.8A  
    Min. Load
    		 0.3A 1.5A 0.2A 0.2A 0A 0A 0A  
    Load Reg.
    		 +5% ~ -5% +5% ~ -5% +5% ~ -5% +5% ~ -5% +5% ~ -5% +10% ~ -10% +10% ~ -10%  
    Ripple m(p-p) 50mV 50mV 120mV 120mV 50mV 100mV 120mV  

     

     
    ENVIRONMENTAL
    Operating Tem.
    		 0°C to 50°C
    Operating Alt.
    		 0-8000feet
    Non-Operating Vibration
    		 Sweep and resonance search for each of X,Y,Z axis at the sweep. Refer the standard IEC 60086-2-6, Rate of 1 / octave / Min
    MTBF
    		 > 100,000 hours at 75% load and 25°C ambient conditions
    Safety Approval
    		 UL(CUL) / TUV / CB / NORDIC
     
    Noise levels
    oV 25 30 35 40 45 50 55 60 65 70 75 80 85 90  
    V                              
    RPM                              
    db