Micro ATX 230W
 
  • 230 Watts output
  • High quality 80mm fan design.
  • S-ATA power included
  • Advanced passive Power Factor Correction (PFC)
  • Over Voltage Protection,
  • Over Power Protection,
  • Over Heat Protection Short
  • Circuit Protection
  • Built in Quad protection






    		•
    Dimension
     
    1X 20 Pin Standard ATX Connector
    3X Peripheral Power Connector
    1X 4-pin ATX12V Power Connector
    1X Floppy Drive Power Connector
    1x S-ATA
    1X 3-Pin Fan speed monitor
     Dimension
    Unit Size 125mmx100mmx76mm
    Net Weight 1 KGS
    Compatible

    Maximum Power
    		 230Watts      
    Over Voltage Protection recycle AC to reset
    		 +3.3 V : < 4.5 V
    +5 V : < 6.8 V
    +12V : < 15.6 V
    Special connectors
    		 1*20-pin Standard ATX connector, 1* 3-pin Fan Speed Monitor, 1* SATA, 1*4-pin ATX 12V Power Connector,3*Peripheral Power Connector,1*Floppy Drive Power Connector
     
     
     
    INPUT
    Input Voltage
    		 115 Vac / 230 Vac (Switch-select)
    Input Frequency
    		 50-60Hz
    Input Surge Current
    		 100 amps maximum/230Vrm
    Input Current
    		 6.0 A at 115 Vac; 3.0 A at 230 Vac
    Hold-up Time
    		 >16ms at full load at 115 Vac
    Efficiency
    		 Typical 68% at full load
    EMI/RFI
    		 FCC Part 15 Class B & CISPR 22 Class B

     

     
    OUTPUT
      +3.3V +5v +12V -12V -5V +5Vs    
    Max load
    		 17.0A 21.0A 10.0A 0.8A 0.3A 2.0A    
    Min. Load
    		 0.5A 1.0A 0.1A 0.0A 0.0A 0.0A    
    Load Reg.
    		 +5% ~ -5% +5% ~ -5% +5% ~ -5% +10% ~ -10% +10% ~ -10% +5% ~ -5%    
    Ripple m(p-p) 50mV 50mV 120mV 100mV 100mV 100mV    

     

     
    ENVIRONMENTAL
    Operating Tem.
    		 10°C to 50°C
    Storage temperature
    		 -40°C to 60°C
    Cooling
    		 Self contained fan with speed control in regard to O/P load or ambient Temp.
    MTBF
    		 > 100,000 hours at 75% load and 25°C ambient conditions
      UL CSA CE FCC TUV